Don’t believe me? Just LISTEN to the crunch in the recipe video! Serve with French fries for the ultimate fish ‘n chips experience at home.

Crispy Beer Battered Fish

When it comes to fish, a fry batter made with beer yields the best result for a light, puffy, ultra crispy coating that stays crispy well beyond the time it takes to serve and eat it. It’s the fish batter used by all the best fish ‘n chips shops. Here’s what makes beer batter so good:

Yeast and carbonation in beer acts like yeast in bread, making the batter go puffy as it cooks so it’s thin and light rather than thick and greasy. It’s like Japan’s famous tempura;Ice cold beer is used to make the batter cold. The shock of cold batter hitting the hot oil makes it go super-crispy. This concept is fairly common knowledge these days in the culinary world, a technique deployed in all my batter-coated fried foods such as everybody’s favourite Honey Chicken; andRice flour for a stay-crispy batter. Just using normal flour doesn’t cut it – it goes soggy within minutes. We need to use a combination of rice and normal flour. This is a proven technique deployed in many Asian fried recipes, such as Honey Chicken and Sweet & Sour Pork.

This battered fish has a light crisp coating that stays crispy for over 15 minutes!

What goes in Beer Batter

All you need for beer batter is cold beer, flour, rice flour, baking powder and salt. For a non alcoholic version, just substitute beer with soda water.

Beer Batter Dry Ingredients

Rice flour – Key for a fish batter that doesn’t go soggy before it hits the table! If you use only wheat flour, it will only stay crispy for a few minutes. Why not use all rice flour? Because rice flour doesn’t go golden when cooked. Nobody wants a pale, white beer battered fish! So we use a combination of wheat flour (which goes golden) and rice flour. Flour – Just plain/all purpose wheat flour which, as noted above, is what makes the fish go a beautiful golden colour as well as helping the batter rise and puff when combined with the baking powder (which doesn’t happen with rice flour); and Baking powder – To make the batter puffy. The yeast and carbonation in beer alone isn’t sufficient to achieve that airy-textured batter shell you get at the best fish ‘n chip shops.

Best beer for Beer Batter

You can use any beer other than dark, heavily flavoured beer like stouts or porters as they will discolour and flavour the batter excessively.  Pale ale and lagers are most commonly used, but I’ve used all sorts in my time and they’ve all worked out fine. You can only barely taste it – the beer is mostly to make the batter crispy and puffy, not for flavour. Also, the alcohol cooks out in the hot oil. Whatever you use, it needs to be ice cold – cool for 2+ hours in the fridge. It’s key for a crispy batter!

Best fish for frying

You can use virtually any white fish fillet such as: snapper, barramundi, cod, flathead, tilapia, hake, haddock, whiting and ling. My favourite is flathead – but it’s pricey! See list below for what fish shops use in different countries. I recommend avoiding:

Fish that dry out easily when cooked – Like swordfish, tuna, bonito, kingfish, marlin. They work fine, but they will be too dry inside. These fish are (mostly) better in raw/rare form such as Ceviche, Poke Bowls, Tartare or carefully grilled;Delicate and thin-filleted fish – Like flounder or sole. Again, it will work fine and actually, it is delicious but the texture of the flesh may be a bit too delicate for frying (ie you bite into it and the flesh kind of “crumbles”). Also these fish tend to be very thin fillets;Oily fish – Like salmon, trout, mackerels, mullet and sardines. You do see these fish in fried form, but it’s not so common with a batter. It’s just a bit too rich.

What fish and chip shops use

Choice of fish varies between countries and regions, depending on what’s available. Most common:

Australia – Basa, hoki, flake (gummy shark!) and hake are seen at everyday suburban fish ‘n chip shops because they are economical options with good flavour and flesh characteristics. Better places will also offer more expensive options such as snapper, barramundi, cod, whiting and flathead (my favourite!);US – Cod, halibut, tilapia, haddock. In the Southeast, catfish is used frequently; andUK – [updated thanks to reader feedback!] Cod and haddock are firm favourites, but other varieties offered include hake, pollock, whiting and plaice.

How to make beer battered fish

Oil heating aside, beer battered fish takes 5 minutes to prepare, and each batch takes 3 minutes to fry. Terrifically fast! 5. Minimum of whisking – Only whisk for 5 seconds, just to incorporate the beer into the dry ingredients – some lumps are fine, even desirable. Over-whisking activates gluten and will compromise crispiness. Cut into desired size. I like “fish cocktail” size – 7 x 3cm / 3 x 1 1/4″ batons – because it’s easier to handle for frying plus has a larger surface area to volume ratio = more crunch! Whole or larger fillets work just fine as well, ie. traditional fish ‘n chip shop format. If your fish is very thick (3cm / 1.25″+), slice horizontally to make thinner pieces, otherwise the fish may not cook through by the time the batter is golden and crispy. Also, there will be too much fish and not enough crispy batter! Just remember the batter puffs up when cooking to double the thickness it was wet so don’t make giant fish pieces! 😂 The other reason batter should be made fresh is the batter will noticeably thicken as gluten begins to forms if left to sit too long. At this stage the fish can sit there while the oil comes to temperature. Note: Recipe makes more batter than you will need. But it’s hard to dredge properly if you don’t have enough. It can cause a dragging action that wipes off too much batter. However, recipe will coat up to around 1kg/2lb of fish. Batter viscosity is also important. If the wet batter is too thick (in consistency) your cooked batter will be thick (in depth) around the fish and tends to soak up too much oil. Too watery on the other hand and it won’t coat the fish properly, and will go soggy quickly. Aim for a batter that runs but fully coats the back of a spoon – see video. 6. Dredge fish – Hold fillet by one end and dip in batter, letting the excess drip off for a second or two. The batter should fully cover the fish but not be a thick coat as mentioned – this batter puffs up a LOT!TIP: Keep batter chilled. If you’re a capable cook and it’s mild weather, the batter can stay out while you cook the fish (3 – 4 batches). If you’re new to frying or it’s a stinking hot summer day, pop the batter back in the fridge while frying. 7. Fry 3 minutes – Gently lower fillet into the hot oil, dropping it in away from you, not towards you, so any splash doesn’t come towards your hand. I use my hands because I have more control, but you can use tongs for safety if you prefer. Cook for 3 minutes until deep golden. There’s no need to turn, though you can push down and submerge each piece under the oil briefly once the batter has set. Fillets often refuse to roll anyway as they become buoyant on one side only!; 8. Drain well on paper towels or a mesh rack, and repeat with remaining fish. How longer the fish stays crispy for – It will stay crispy for 15 to 20 minutes, even after it goes cold. But obviously, best served hot!

Handy large-batch cooking tip

Using a 1-minute, higher temperature, Asian double-fry method used in things like Honey Chicken and Sweet & Sour Pork, you can make big batches of beer battered fish and serve it all up piping hot! Here’s how:

Sauces for fried fish

Many options – and don’t let anyone tell you what is right or wrong!

Lemon wedges – A squeeze of lemon is always welcome and many people are happy with just this;Tartare sauce – I like to make mine extra lemony when using it for fried foods;Any seafood dipping sauce – Find all my favourites here;Aioli (garlicky mayonnaise);Yogurt mixed with lemon – For a lighter option, though somewhat ironic when making fried fish!Ketchup or Aussie tomato sauce;Malt vinegar and a sprinkle of salt – The British way!

Though frankly, if you’ve got really good fish and you season every layer lightly, then you’ll munch it plain and won’t even think about a dipping sauce!

Homemade French fries on the side

For the ultimate fish and chips experience at home, crispy homemade French fries are a must! Fluffy on the inside, crispy on the outside – and they STAY crispy even long after they’ve gone cold thanks to a game-changing new method. It’s rare to find fries this good even at up-market bistros.

Worth deep frying

If, like me, you don’t fry much – oil wastage, clean up and all that jazz – and are on the fence about whether it’s worth making homemade fried fish, remember this: crispy battered fried fish is one of those things that you simply cannot buy in frozen convenience packets. And it’s one of those things you cannot convert into an oven version – or an airfyer!. So, is it worth making? YES, a thousand times over!!– Nagi x

Watch how to make it

And LISTEN to the CRUNCH!

Life of Dozer

Waiting to be asked to check if it’s crispy enough. See recipe video above for his assessment…….

Crispy Beer Battered Fish - 76Crispy Beer Battered Fish - 5Crispy Beer Battered Fish - 22Crispy Beer Battered Fish - 51Crispy Beer Battered Fish - 59Crispy Beer Battered Fish - 71Crispy Beer Battered Fish - 53Crispy Beer Battered Fish - 60Crispy Beer Battered Fish - 6Crispy Beer Battered Fish - 70Crispy Beer Battered Fish - 14Crispy Beer Battered Fish - 99Crispy Beer Battered Fish - 13Crispy Beer Battered Fish - 5